Install nmap 7.31 on CentOS 6.8

nmap 7.31がリリースしていたのでインストールしてみました｡
久しぶりの./configureで気分転換｡

Nmap 7.31 stability-focused point release
http://seclists.org/nmap-announce/2016/6

【環境】
･CentOS release 6.8 (Final)
･Kernel: 2.6.32-642.6.1.el6.x86_64
･開発環境

git clone

# git clone https://github.com/nmap/nmap.git
Initialized empty Git repository in /root/nmap/.git/
remote: Counting objects: 63790, done.
remote: Compressing objects: 100% (22/22), done.
remote: Total 63790 (delta 11), reused 2 (delta 2), pack-reused 63766
Receiving objects: 100% (63790/63790), 73.07 MiB | 1.13 MiB/s, done.
Resolving deltas: 100% (48567/48567), done.

# git clone https://github.com/nmap/nmap.git

Initialized empty Git repository in /root/nmap/.git/

remote: Counting objects: 63790, done.

remote: Compressing objects: 100% (22/22), done.

remote: Total 63790 (delta 11), reused 2 (delta 2), pack-reused 63766

Receiving objects: 100% (63790/63790), 73.07 MiB | 1.13 MiB/s, done.

Resolving deltas: 100% (48567/48567), done.

./configure

# cd nmap/
# ./configure
checking whether NLS is requested... yes
checking build system type... x86_64-unknown-linux-gnu
(snip)

# cd nmap/

# ./configure

checking whether NLS is requested... yes

checking build system type... x86_64-unknown-linux-gnu

(snip)

make

# make
g++ -MM -I./liblinear -I./liblua -I./libdnet-stripped/include -I./libpcre  -I./libpcap -I./nbase -I./nsock/include -DHAVE_CONFIG_H -DNMAP_NAME=\"Nmap\" -DNMAP_URL=\"https://nmap.org\" -DNMAP_PLATFORM=\"x86_64-unknown-linux-gnu\" -DNMAPDATADIR=\"/usr/local/share/nmap\" -D_FORTIFY_SOURCE=2 charpool.cc FingerPrintResults.cc FPEngine.cc FPModel.cc idle_scan.cc MACLookup.cc main.cc nmap.cc nmap_dns.cc nmap_error.cc nmap_ftp.cc NmapOps.cc NmapOutputTable.cc nmap_tty.cc osscan2.cc osscan.cc output.cc payload.cc portlist.cc portreasons.cc protocols.cc scan_engine.cc scan_engine_connect.cc scan_engine_raw.cc service_scan.cc services.cc Target.cc TargetGroup.cc targets.cc tcpip.cc timing.cc traceroute.cc utils.cc xml.cc nse_main.cc nse_utility.cc nse_nsock.cc nse_dnet.cc nse_fs.cc nse_nmaplib.cc nse_debug.cc nse_pcrelib.cc nse_lpeg.cc nse_openssl.cc nse_ssl_cert.cc > makefile.dep
Compiling libnetutil
(snip)

# make

g++ -MM -I./liblinear -I./liblua -I./libdnet-stripped/include -I./libpcre -I./libpcap -I./nbase -I./nsock/include -DHAVE_CONFIG_H -DNMAP_NAME=\"Nmap\" -DNMAP_URL=\"https://nmap.org\" -DNMAP_PLATFORM=\"x86_64-unknown-linux-gnu\" -DNMAPDATADIR=\"/usr/local/share/nmap\" -D_FORTIFY_SOURCE=2 charpool.cc FingerPrintResults.cc FPEngine.cc FPModel.cc idle_scan.cc MACLookup.cc main.cc nmap.cc nmap_dns.cc nmap_error.cc nmap_ftp.cc NmapOps.cc NmapOutputTable.cc nmap_tty.cc osscan2.cc osscan.cc output.cc payload.cc portlist.cc portreasons.cc protocols.cc scan_engine.cc scan_engine_connect.cc scan_engine_raw.cc service_scan.cc services.cc Target.cc TargetGroup.cc targets.cc tcpip.cc timing.cc traceroute.cc utils.cc xml.cc nse_main.cc nse_utility.cc nse_nsock.cc nse_dnet.cc nse_fs.cc nse_nmaplib.cc nse_debug.cc nse_pcrelib.cc nse_lpeg.cc nse_openssl.cc nse_ssl_cert.cc > makefile.dep

Compiling libnetutil

(snip)

make install

# make install
Compiling libnetutil
cd libnetutil && make
(snip)

# which nmap
/usr/local/bin/nmap

# nmap -V
Nmap version 7.31SVN ( https://nmap.org )
Platform: x86_64-unknown-linux-gnu
Compiled with: nmap-liblua-5.3.3 openssl-1.0.1e nmap-libpcre-7.6 nmap-libpcap-1.7.3 nmap-libdnet-1.12 ipv6
Compiled without:
Available nsock engines: epoll poll select

# make install

Compiling libnetutil

cd libnetutil && make

(snip)

# which nmap

/usr/local/bin/nmap

# nmap -V

Nmap version 7.31SVN ( https://nmap.org )

Platform: x86_64-unknown-linux-gnu

Compiled with: nmap-liblua-5.3.3 openssl-1.0.1e nmap-libpcre-7.6 nmap-libpcap-1.7.3 nmap-libdnet-1.12 ipv6

Compiled without:

Available nsock engines: epoll poll select

簡単にインストールできました｡

# nmap -h
Nmap 7.31SVN ( https://nmap.org )
Usage: nmap [Scan Type(s)] [Options] {target specification}
TARGET SPECIFICATION:
  Can pass hostnames, IP addresses, networks, etc.
  Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254
  -iL <inputfilename>: Input from list of hosts/networks
  -iR <num hosts>: Choose random targets
  --exclude <host1[,host2][,host3],...>: Exclude hosts/networks
  --excludefile <exclude_file>: Exclude list from file
HOST DISCOVERY:
  -sL: List Scan - simply list targets to scan
  -sn: Ping Scan - disable port scan
  -Pn: Treat all hosts as online -- skip host discovery
  -PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports
  -PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes
  -PO[protocol list]: IP Protocol Ping
  -n/-R: Never do DNS resolution/Always resolve [default: sometimes]
  --dns-servers <serv1[,serv2],...>: Specify custom DNS servers
  --system-dns: Use OS's DNS resolver
  --traceroute: Trace hop path to each host
SCAN TECHNIQUES:
  -sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans
  -sU: UDP Scan
  -sN/sF/sX: TCP Null, FIN, and Xmas scans
  --scanflags <flags>: Customize TCP scan flags
  -sI <zombie host[:probeport]>: Idle scan
  -sY/sZ: SCTP INIT/COOKIE-ECHO scans
  -sO: IP protocol scan
  -b <FTP relay host>: FTP bounce scan
PORT SPECIFICATION AND SCAN ORDER:
  -p <port ranges>: Only scan specified ports
    Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080,S:9
  --exclude-ports <port ranges>: Exclude the specified ports from scanning
  -F: Fast mode - Scan fewer ports than the default scan
  -r: Scan ports consecutively - don't randomize
  --top-ports <number>: Scan <number> most common ports
  --port-ratio <ratio>: Scan ports more common than <ratio>
SERVICE/VERSION DETECTION:
  -sV: Probe open ports to determine service/version info
  --version-intensity <level>: Set from 0 (light) to 9 (try all probes)
  --version-light: Limit to most likely probes (intensity 2)
  --version-all: Try every single probe (intensity 9)
  --version-trace: Show detailed version scan activity (for debugging)
SCRIPT SCAN:
  -sC: equivalent to --script=default
  --script=<Lua scripts>: <Lua scripts> is a comma separated list of
           directories, script-files or script-categories
  --script-args=<n1=v1,[n2=v2,...]>: provide arguments to scripts
  --script-args-file=filename: provide NSE script args in a file
  --script-trace: Show all data sent and received
  --script-updatedb: Update the script database.
  --script-help=<Lua scripts>: Show help about scripts.
           <Lua scripts> is a comma-separated list of script-files or
           script-categories.
OS DETECTION:
  -O: Enable OS detection
  --osscan-limit: Limit OS detection to promising targets
  --osscan-guess: Guess OS more aggressively
TIMING AND PERFORMANCE:
  Options which take <time> are in seconds, or append 'ms' (milliseconds),
  's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m).
  -T<0-5>: Set timing template (higher is faster)
  --min-hostgroup/max-hostgroup <size>: Parallel host scan group sizes
  --min-parallelism/max-parallelism <numprobes>: Probe parallelization
  --min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout <time>: Specifies
      probe round trip time.
  --max-retries <tries>: Caps number of port scan probe retransmissions.
  --host-timeout <time>: Give up on target after this long
  --scan-delay/--max-scan-delay <time>: Adjust delay between probes
  --min-rate <number>: Send packets no slower than <number> per second
  --max-rate <number>: Send packets no faster than <number> per second
FIREWALL/IDS EVASION AND SPOOFING:
  -f; --mtu <val>: fragment packets (optionally w/given MTU)
  -D <decoy1,decoy2[,ME],...>: Cloak a scan with decoys
  -S <IP_Address>: Spoof source address
  -e <iface>: Use specified interface
  -g/--source-port <portnum>: Use given port number
  --proxies <url1,[url2],...>: Relay connections through HTTP/SOCKS4 proxies
  --data <hex string>: Append a custom payload to sent packets
  --data-string <string>: Append a custom ASCII string to sent packets
  --data-length <num>: Append random data to sent packets
  --ip-options <options>: Send packets with specified ip options
  --ttl <val>: Set IP time-to-live field
  --spoof-mac <mac address/prefix/vendor name>: Spoof your MAC address
  --badsum: Send packets with a bogus TCP/UDP/SCTP checksum
OUTPUT:
  -oN/-oX/-oS/-oG <file>: Output scan in normal, XML, s|<rIpt kIddi3,
     and Grepable format, respectively, to the given filename.
  -oA <basename>: Output in the three major formats at once
  -v: Increase verbosity level (use -vv or more for greater effect)
  -d: Increase debugging level (use -dd or more for greater effect)
  --reason: Display the reason a port is in a particular state
  --open: Only show open (or possibly open) ports
  --packet-trace: Show all packets sent and received
  --iflist: Print host interfaces and routes (for debugging)
  --append-output: Append to rather than clobber specified output files
  --resume <filename>: Resume an aborted scan
  --stylesheet <path/URL>: XSL stylesheet to transform XML output to HTML
  --webxml: Reference stylesheet from Nmap.Org for more portable XML
  --no-stylesheet: Prevent associating of XSL stylesheet w/XML output
MISC:
  -6: Enable IPv6 scanning
  -A: Enable OS detection, version detection, script scanning, and traceroute
  --datadir <dirname>: Specify custom Nmap data file location
  --send-eth/--send-ip: Send using raw ethernet frames or IP packets
  --privileged: Assume that the user is fully privileged
  --unprivileged: Assume the user lacks raw socket privileges
  -V: Print version number
  -h: Print this help summary page.
EXAMPLES:
  nmap -v -A scanme.nmap.org
  nmap -v -sn 192.168.0.0/16 10.0.0.0/8
  nmap -v -iR 10000 -Pn -p 80
SEE THE MAN PAGE (https://nmap.org/book/man.html) FOR MORE OPTIONS AND EXAMPLES

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

# nmap -h

Nmap 7.31SVN ( https://nmap.org )

Usage: nmap [Scan Type(s)] [Options] {target specification}

TARGET SPECIFICATION:

Can pass hostnames, IP addresses, networks, etc.

Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254

-iL <inputfilename>: Input from list of hosts/networks

-iR <num hosts>: Choose random targets

--exclude <host1[,host2][,host3],...>: Exclude hosts/networks

--excludefile <exclude_file>: Exclude list from file

HOST DISCOVERY:

-sL: List Scan - simply list targets to scan

-sn: Ping Scan - disable port scan

-Pn: Treat all hosts as online -- skip host discovery

-PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports

-PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes

-PO[protocol list]: IP Protocol Ping

-n/-R: Never do DNS resolution/Always resolve [default: sometimes]

--dns-servers <serv1[,serv2],...>: Specify custom DNS servers

--system-dns: Use OS's DNS resolver

--traceroute: Trace hop path to each host

SCAN TECHNIQUES:

-sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans

-sU: UDP Scan

-sN/sF/sX: TCP Null, FIN, and Xmas scans

--scanflags <flags>: Customize TCP scan flags

-sI <zombie host[:probeport]>: Idle scan

-sY/sZ: SCTP INIT/COOKIE-ECHO scans

-sO: IP protocol scan

-b <FTP relay host>: FTP bounce scan

PORT SPECIFICATION AND SCAN ORDER:

-p <port ranges>: Only scan specified ports

Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080,S:9

--exclude-ports <port ranges>: Exclude the specified ports from scanning

-F: Fast mode - Scan fewer ports than the default scan

-r: Scan ports consecutively - don't randomize

--top-ports <number>: Scan <number> most common ports

--port-ratio <ratio>: Scan ports more common than <ratio>

SERVICE/VERSION DETECTION:

-sV: Probe open ports to determine service/version info

--version-intensity <level>: Set from 0 (light) to 9 (try all probes)

--version-light: Limit to most likely probes (intensity 2)

--version-all: Try every single probe (intensity 9)

--version-trace: Show detailed version scan activity (for debugging)

SCRIPT SCAN:

-sC: equivalent to --script=default

--script=<Lua scripts>: <Lua scripts> is a comma separated list of

directories, script-files or script-categories

--script-args=<n1=v1,[n2=v2,...]>: provide arguments to scripts

--script-args-file=filename: provide NSE script args in a file

--script-trace: Show all data sent and received

--script-updatedb: Update the script database.

--script-help=<Lua scripts>: Show help about scripts.

<Lua scripts> is a comma-separated list of script-files or

script-categories.

OS DETECTION:

-O: Enable OS detection

--osscan-limit: Limit OS detection to promising targets

--osscan-guess: Guess OS more aggressively

TIMING AND PERFORMANCE:

Options which take <time> are in seconds, or append 'ms' (milliseconds),

's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m).

-T<0-5>: Set timing template (higher is faster)

--min-hostgroup/max-hostgroup <size>: Parallel host scan group sizes

--min-parallelism/max-parallelism <numprobes>: Probe parallelization

--min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout <time>: Specifies

probe round trip time.

--max-retries <tries>: Caps number of port scan probe retransmissions.

--host-timeout <time>: Give up on target after this long

--scan-delay/--max-scan-delay <time>: Adjust delay between probes

--min-rate <number>: Send packets no slower than <number> per second

--max-rate <number>: Send packets no faster than <number> per second

FIREWALL/IDS EVASION AND SPOOFING:

-f; --mtu <val>: fragment packets (optionally w/given MTU)

-D <decoy1,decoy2[,ME],...>: Cloak a scan with decoys

-S <IP_Address>: Spoof source address

-e <iface>: Use specified interface

-g/--source-port <portnum>: Use given port number

--proxies <url1,[url2],...>: Relay connections through HTTP/SOCKS4 proxies

--data <hex string>: Append a custom payload to sent packets

--data-string <string>: Append a custom ASCII string to sent packets

--data-length <num>: Append random data to sent packets

--ip-options <options>: Send packets with specified ip options

--ttl <val>: Set IP time-to-live field

--spoof-mac <mac address/prefix/vendor name>: Spoof your MAC address

--badsum: Send packets with a bogus TCP/UDP/SCTP checksum

OUTPUT:

-oN/-oX/-oS/-oG <file>: Output scan in normal, XML, s|<rIpt kIddi3,

and Grepable format, respectively, to the given filename.

-oA <basename>: Output in the three major formats at once

-v: Increase verbosity level (use -vv or more for greater effect)

-d: Increase debugging level (use -dd or more for greater effect)

--reason: Display the reason a port is in a particular state

--open: Only show open (or possibly open) ports

--packet-trace: Show all packets sent and received

--iflist: Print host interfaces and routes (for debugging)

--append-output: Append to rather than clobber specified output files

--resume <filename>: Resume an aborted scan

--stylesheet <path/URL>: XSL stylesheet to transform XML output to HTML

--webxml: Reference stylesheet from Nmap.Org for more portable XML

--no-stylesheet: Prevent associating of XSL stylesheet w/XML output

MISC:

-6: Enable IPv6 scanning

-A: Enable OS detection, version detection, script scanning, and traceroute

--datadir <dirname>: Specify custom Nmap data file location

--send-eth/--send-ip: Send using raw ethernet frames or IP packets

--privileged: Assume that the user is fully privileged

--unprivileged: Assume the user lacks raw socket privileges

-V: Print version number

-h: Print this help summary page.

EXAMPLES:

nmap -v -A scanme.nmap.org

nmap -v -sn 192.168.0.0/16 10.0.0.0/8

nmap -v -iR 10000 -Pn -p 80

SEE THE MAN PAGE (https://nmap.org/book/man.html) FOR MORE OPTIONS AND EXAMPLES

RootLinks Co., Ltd.

Install nmap 7.31 on CentOS 6.8

Leave a Reply Cancel Reply

2016年10月
日	月	火	水	木	金	土
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31

RootLinks Co., Ltd.

Install nmap 7.31 on CentOS 6.8

Related posts:

Leave a Reply Cancel Reply